meson.options

option('tests', type: 'feature', description: 'Build tests')
option('boot-flag-safe-mode-support', type: 'feature', description: 'Add option to enable/disable safe mode in boot flags')
option('i2c-whitelist-check', type: 'feature', description: 'Add option to enable/disable i2c master write read command white list checking')

# SoftPowerOff
option('softoff', type: 'feature', description: 'Builds soft power off')
option('softoff-busname', type: 'string', value: 'xyz.openbmc_project.Ipmi.Internal.SoftPowerOff', description: 'The Dbus busname to own for SoftPowerOff')
option('softoff-objpath', type: 'string', value: '/xyz/openbmc_project/ipmi/internal/soft_power_off', description: 'The SoftPowerOff Dbus root')
option('ipmi-sms-atn-ack-timeout-secs', type: 'integer', value: 3, description: 'Timeout for host to ack and query SMS_ATN from BMC')
option('ipmi-host-shutdown-complete-timeout-secs', type: 'integer', value: 2700, description: 'Wait time for host to shutdown')
# Indicates an in-band power off or reboot request from the host
# This file is used to ensure the soft off service does not run for host
# initiated shutdown or reboot requests
option('host-inband-request-dir', type: 'string', value: '/run/openbmc/', description: 'Directory to store host initiated shutdown file')
option('host-inband-request-file', type: 'string', value: 'host@%u-request', description: 'File to create if host has initiated shutdown or reboot')


# Config Variables
option('board-sensor', type: 'string', value: '/xyz/openbmc_project/inventory/system/chassis/motherboard', description: 'The inventory path to the motherboard fault sensor')
option('system-sensor', type: 'string', value: '/xyz/openbmc_project/inventory/system', description: 'The inventory path to the system event sensor')

# Control Host Interfaces
option('control-host-busname', type: 'string', value: 'xyz.openbmc_project.Control.Host', description: 'The Control Host Dbus busname to own')
option('control-host-obj-mgr', type: 'string', value: '/xyz/openbmc_project/control', description: 'The Control Host D-Bus Object Manager')
option('host-name', type: 'string', value: 'host', description: 'The Control Host D-Bus Object Manager')

# Power reading sensor configuration file
option('power-reading-sensor', type: 'string', value: '/usr/share/ipmi-providers/power_reading.json', description: 'Power reading sensor configuration file')
option('host-ipmi-lib-path', type: 'string', value: '/usr/lib/ipmid-providers/', description: 'The file path to search for libraries')

# When a sensor read fails, hwmon will update the OperationalState interface's Functional property.
# This will mark the sensor as not functional and we will skip reading from that sensor.
option('update-functional-on-fail', type: 'feature', value: 'disabled', description: 'Check functional property to skip reading from faulty sensors')

# Features

# When libuserlayer is disabled, libuserlayer won't be included in the build.
option('libuserlayer', type: 'feature', description: 'Option to exclue exclude libuserlayer')

# When transport-oem is enabled, the transporthandler_oem.cpp contents
# are compiled and added to the project. The transporthandler_oem.cpp file is
# copied from your own customization layer in the
# phosphor-ipmi-host_%.bbappend file. It is not necessary to create this file
# unless OEM Parameter extensions are required.
option('transport-oem', type: 'feature', value: 'disabled', description: 'Enable transporthandler_oem contents')

# IPMI whitelist mechanism is not needed by everyone; offer a way to disable it
option('ipmi-whitelist', type: 'feature', description: 'Enable/disable IPMI whitelist filtering')
option('whitelist-conf', type: 'string', value: 'host-ipmid-whitelist.conf', description: 'Paths to IPMI whitelisted commands conf files')

# Entity Manager Decorators
option('entity-manager-decorators', type: 'feature', value: 'enabled', description: 'The Entity Manager Decorators flag is enabled by default; offer a way to disable it')

# Dynamic Sensor Stack
option('dynamic-sensors', type: 'feature', value: 'disabled', description: 'Dynamic sensors stack is enabled by default; offer a way to disable it')
option('dynamic-sensors-write', type: 'feature', value: 'disabled', description: 'Dynamic sensors stack is enabled by default; offer a way to disable it')
option('hybrid-sensors', type: 'feature', value: 'disabled', description: 'Hybrid sensors stack is disabled by default; offer a way to enable it')

# Sensor Cache
option('sensors-cache', type: 'feature', value: 'disabled', description: 'Sensor cache stack is disabled by default; offer a way to enable it')

# Short Sensor Names for IPMI
option('shortname-remove-suffix', type: 'feature', value: 'enabled', description: 'shortname-remove-suffix is enabled by default')
option('shortname-replace-words', type: 'feature', value: 'disabled', description: 'shortname-replace-words is disabled by default')

# SEL Logger
option('sel-logger-clears-sel', type: 'feature', value: 'disabled', description: 'Clearing SEL through sel-logger is disabled by default; offer a way to enable it')

# Generate configuration from Yaml
option('sensor-yaml-gen', type: 'string', value: 'sensor-example.yaml')
option('invsensor-yaml-gen', type: 'string', value: 'inventory-sensor-example.yaml')
option('fru-yaml-gen', type: 'string', value: 'fru-read-example.yaml')

# Software Version
option('get-dbus-active-software', type: 'feature', description: 'Use the  getActiveSoftwareVersionInfo for the BMC version and dev_id.json as backup')
option('fw-ver-regex', type : 'string', value : '(\\\\d+)\\\\.(\\\\d+)', description : 'Regular expressions for parsing firmware revision')
option('matches-map', type : 'array', value : ['1', '2', '0', '0', '0', '0'], description : 'An array of integers')

# libipmi20.so library
option('dynamic-storages-only', type: 'feature', value: 'disabled', description: 'Request to compile storage commands in the libipmi20 library')