meson.options

option('tests', type: 'feature', description: 'Build tests')
option(
    'boot-flag-safe-mode-support',
    type: 'feature',
    description: 'Add option to enable/disable safe mode in boot flags',
)
option(
    'i2c-whitelist-check',
    type: 'feature',
    description: 'Add option to enable/disable i2c master write read command white list checking',
)

# SoftPowerOff
option('softoff', type: 'feature', description: 'Builds soft power off')
option(
    'softoff-busname',
    type: 'string',
    value: 'xyz.openbmc_project.Ipmi.Internal.SoftPowerOff',
    description: 'The Dbus busname to own for SoftPowerOff',
)
option(
    'softoff-objpath',
    type: 'string',
    value: '/xyz/openbmc_project/ipmi/internal/soft_power_off',
    description: 'The SoftPowerOff Dbus root',
)
option(
    'ipmi-sms-atn-ack-timeout-secs',
    type: 'integer',
    value: 3,
    description: 'Timeout for host to ack and query SMS_ATN from BMC',
)
option(
    'ipmi-host-shutdown-complete-timeout-secs',
    type: 'integer',
    value: 2700,
    description: 'Wait time for host to shutdown',
)
# Indicates an in-band power off or reboot request from the host
# This file is used to ensure the soft off service does not run for host
# initiated shutdown or reboot requests
option(
    'host-inband-request-dir',
    type: 'string',
    value: '/run/openbmc/',
    description: 'Directory to store host initiated shutdown file',
)
option(
    'host-inband-request-file',
    type: 'string',
    value: 'host@%u-request',
    description: 'File to create if host has initiated shutdown or reboot',
)


# Config Variables
option(
    'board-sensor',
    type: 'string',
    value: '/xyz/openbmc_project/inventory/system/chassis/motherboard',
    description: 'The inventory path to the motherboard fault sensor',
)
option(
    'system-sensor',
    type: 'string',
    value: '/xyz/openbmc_project/inventory/system',
    description: 'The inventory path to the system event sensor',
)

# Control Host Interfaces
option(
    'control-host-busname',
    type: 'string',
    value: 'xyz.openbmc_project.Control.Host',
    description: 'The Control Host Dbus busname to own',
)
option(
    'control-host-obj-mgr',
    type: 'string',
    value: '/xyz/openbmc_project/control',
    description: 'The Control Host D-Bus Object Manager',
)
option(
    'host-name',
    type: 'string',
    value: 'host',
    description: 'The Control Host D-Bus Object Manager',
)

# Power reading sensor configuration file
option(
    'power-reading-sensor',
    type: 'string',
    value: '/usr/share/ipmi-providers/power_reading.json',
    description: 'Power reading sensor configuration file',
)
option(
    'host-ipmi-lib-path',
    type: 'string',
    value: '/usr/lib/ipmid-providers/',
    description: 'The file path to search for libraries',
)

# When a sensor read fails, hwmon will update the OperationalState interface's Functional property.
# This will mark the sensor as not functional and we will skip reading from that sensor.
option(
    'update-functional-on-fail',
    type: 'feature',
    value: 'disabled',
    description: 'Check functional property to skip reading from faulty sensors',
)

# Features

# When libuserlayer is disabled, libuserlayer won't be included in the build.
option(
    'libuserlayer',
    type: 'feature',
    description: 'Option to exclue exclude libuserlayer',
)

# When transport-oem is enabled, the transporthandler_oem.cpp contents
# are compiled and added to the project. The transporthandler_oem.cpp file is
# copied from your own customization layer in the
# phosphor-ipmi-host_%.bbappend file. It is not necessary to create this file
# unless OEM Parameter extensions are required.
option(
    'transport-oem',
    type: 'feature',
    value: 'disabled',
    description: 'Enable transporthandler_oem contents',
)

# IPMI whitelist mechanism is not needed by everyone; offer a way to disable it
option(
    'ipmi-whitelist',
    type: 'feature',
    description: 'Enable/disable IPMI whitelist filtering',
)
option(
    'whitelist-conf',
    type: 'string',
    value: 'host-ipmid-whitelist.conf',
    description: 'Paths to IPMI whitelisted commands conf files',
)

# Entity Manager Decorators
option(
    'entity-manager-decorators',
    type: 'feature',
    value: 'enabled',
    description: 'The Entity Manager Decorators flag is enabled by default; offer a way to disable it',
)

# Dynamic Sensor Stack
option(
    'dynamic-sensors',
    type: 'feature',
    value: 'disabled',
    description: 'Dynamic sensors stack is enabled by default; offer a way to disable it',
)
option(
    'dynamic-sensors-write',
    type: 'feature',
    value: 'disabled',
    description: 'Dynamic sensors stack is enabled by default; offer a way to disable it',
)
option(
    'hybrid-sensors',
    type: 'feature',
    value: 'disabled',
    description: 'Hybrid sensors stack is disabled by default; offer a way to enable it',
)
option(
    'sensors-oem',
    type: 'feature',
    value: 'disabled',
    description: 'OEM sensor SDR parsing is disabled by default; offer a way to enable it',
)

# Sensor Cache
option(
    'sensors-cache',
    type: 'feature',
    value: 'disabled',
    description: 'Sensor cache stack is disabled by default; offer a way to enable it',
)

# Short Sensor Names for IPMI
option(
    'shortname-remove-suffix',
    type: 'feature',
    value: 'enabled',
    description: 'shortname-remove-suffix is enabled by default',
)
option(
    'shortname-replace-words',
    type: 'feature',
    value: 'disabled',
    description: 'shortname-replace-words is disabled by default',
)

# Generate configuration from Yaml
option('sensor-yaml-gen', type: 'string', value: 'sensor-example.yaml')
option(
    'invsensor-yaml-gen',
    type: 'string',
    value: 'inventory-sensor-example.yaml',
)
option('fru-yaml-gen', type: 'string', value: 'fru-read-example.yaml')

# Software Version
option(
    'get-dbus-active-software',
    type: 'feature',
    description: 'Use the  getActiveSoftwareVersionInfo for the BMC version and dev_id.json as backup',
)
option(
    'fw-ver-regex',
    type: 'string',
    value: '(\\\\d+)\\\\.(\\\\d+)',
    description: 'Regular expressions for parsing firmware revision',
)
option(
    'matches-map',
    type: 'array',
    value: ['1', '2', '0', '0', '0', '0'],
    description: 'An array of integers',
)

# libipmi20.so library
option(
    'dynamic-storages-only',
    type: 'feature',
    value: 'disabled',
    description: 'Request to compile storage commands in the libipmi20 library',
)

# open-power specific functionality.
option(
    'open-power',
    type: 'feature',
    description: 'Support open-power specific functions',
)

# HW transport
option(
    'transport-implementation',
    type: 'combo',
    choices: ['null', 'serial'],
    description: 'transport',
)