blob: c241caa8693e1996ff570449a3031f70d8b7f055 [file] [log] [blame]
Patrick Williamsd8c66bc2016-06-20 12:57:21 -05001# BBMASK contains regular expressions that can be used to tell BitBake to ignore
2# certain recipes.
3#BBMASK = ""
4
5#
6# Parallelism Options
7#
8# These two options control how much parallelism BitBake should use. The first
9# option determines how many tasks bitbake should run in parallel:
10#
11#BB_NUMBER_THREADS ?= "4"
12#
13# Default to setting automatically based on cpu count
14#BB_NUMBER_THREADS ?= "${@oe.utils.cpu_count()}"
15#
16# The second option controls how many processes make should run in parallel when
17# running compile tasks:
18#
19#PARALLEL_MAKE ?= "-j 4"
20#
21# Default to setting automatically based on cpu count
22#PARALLEL_MAKE ?= "-j ${@oe.utils.cpu_count()}"
23#
24# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
25# be appropriate for example.
Andrew Geissler9b4d8b02021-02-19 12:26:16 -060026#
27# Some users are behind firewalls or use servers where the number of parallel connections
28# is limited. In such cases you can limit the number of fetch tasks which run in parallel by
29# setting the option below, in this case limiting to a maximum of 4 fetch tasks in parallel:
30#
31#do_fetch[number_threads] = "4"
32#
Patrick Williamsd8c66bc2016-06-20 12:57:21 -050033
Brad Bishopc342db32019-05-15 21:57:59 -040034# If you want to get an image based on directfb without x11 alter
35# DISTRO_FEATURES:
36DISTRO_FEATURES_append = " directfb"
37DISTRO_FEATURES_remove = "x11"
Patrick Williamsd8c66bc2016-06-20 12:57:21 -050038
39# ENABLE_BINARY_LOCALE_GENERATION controls the generation of binary locale
40# packages at build time using qemu-native. Disabling it (by setting it to 0)
41# will save some build time at the expense of breaking i18n on devices with
42# less than 128MB RAM.
43#ENABLE_BINARY_LOCALE_GENERATION = "1"
44
Brad Bishop6e60e8b2018-02-01 10:27:11 -050045# If GLIBC_SPLIT_LC_PACKAGES is set to a non-zero value, convert
46# glibc-binary-localedata-XX-YY to be a meta package depending on
47# glibc-binary-localedata-XX-YY-lc-address and so on. This enables
48# saving quite some space if someone doesn't need LC_COLLATE for
49# example.
50#GLIBC_SPLIT_LC_PACKAGES = "1"
51
Patrick Williamsd8c66bc2016-06-20 12:57:21 -050052# Set GLIBC_GENERATE_LOCALES to the locales you wish to generate should you not
53# wish to perform the time-consuming step of generating all LIBC locales.
54# NOTE: If removing en_US.UTF-8 you will also need to uncomment, and set
55# appropriate value for IMAGE_LINGUAS.
56# WARNING: this may break localisation!
Brad Bishop1a4b7ee2018-12-16 17:11:34 -080057# WARNING: some recipes expect certain localizations to be enabled, e.g.
58# bash-ptest: fr-fr, de-de
59# glib-2.0-ptest: tr-tr, lt-lt, ja-jp.euc-jp, fa-ir, ru-ru, de-de, hr-hr, el-gr, fr-fr, es-es, en-gb
60# if you remove some of these and enable ptest, you'll get QA warning like:
61# ERROR: glib-2.0-1_2.58.0-r0 do_package_qa: QA Issue: glib-2.0-ptest rdepends on locale-base-de-de, but it isn't a build dependency? [build-deps]
Patrick Williamsd8c66bc2016-06-20 12:57:21 -050062#GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 en_US.UTF-8"
63#IMAGE_LINGUAS ?= "en-gb"
64
65# The following are used to control options related to debugging.
66#
67# Uncomment this to change the optimization to make debugging easer, at the
68# possible cost of performance.
69# DEBUG_BUILD = "1"
70#
71# Uncomment this to disable the stripping of the installed binaries
72# INHIBIT_PACKAGE_STRIP = "1"
73#
74# Uncomment this to disable the split of the debug information into -dbg files
75# INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
76#
77# When splitting debug information, the following controls the results of the
78# file splitting.
79#
80# .debug (default):
81# When splitting the debug information will be placed into
82# a .debug directory in the same dirname of the binary produced:
83# /bin/foo -> /bin/.debug/foo
84#
85# debug-file-directory:
86# When splitting the debug information will be placed into
87# a central debug-file-directory, /usr/lib/debug:
88# /bin/foo -> /usr/lib/debug/bin/foo.debug
89#
90# Any source code referenced in the debug symbols will be copied
91# and made available within the /usr/src/debug directory
92#
93#PACKAGE_DEBUG_SPLIT_STYLE = '.debug'
94# PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory'
95
96# Uncomment these to build a package such that you can use gprof to profile it.
Andrew Geissler9b4d8b02021-02-19 12:26:16 -060097# NOTE: Don't build glibc itself with these flags, or it'll fail to build.
Patrick Williamsd8c66bc2016-06-20 12:57:21 -050098#
99# PROFILE_OPTIMIZATION = "-pg"
100# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
101# LDFLAGS =+ "-pg"
102
103# TCMODE controls the characteristics of the generated packages/images by
104# telling poky which toolchain 'profile' to use.
105#
106# The default is "default" which uses the internal toolchain. With
107# additional layers, it is possible to set this to use a precompiled
108# external toolchain. One example is the Sourcery G++ Toolchain, support
109# for which is now in the separate meta-sourcery layer:
110#
111# http://github.com/MentorEmbedded/meta-sourcery/
112#
113# meta-sourcery can be used as a template for adding support for other
114# external toolchains. See the link above for further details.
115#
116# TCMODE points the system to a file in conf/distro/include/tcmode-${TCMODE}.inc,
117# so for meta-sourcery which has conf/distro/include/tcmode-external-sourcery.inc
118# you would set it as follows:
119#
120# TCMODE ?= "external-sourcery"
121
122# mklibs library size optimization is more useful to smaller images,
123# and less useful for bigger images. Also mklibs library optimization
124# can break the ABI compatibility, so should not be applied to the
125# images which are to be extended or upgraded later.
126#This enabled mklibs library size optimization just for the specified image.
127#MKLIBS_OPTIMIZED_IMAGES ?= "core-image-minimal"
128#This enable mklibs library size optimization will be for all the images.
129#MKLIBS_OPTIMIZED_IMAGES ?= "all"
130
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500131# This value is currently used by pseudo to determine if the recipe should
132# build both the 32-bit and 64-bit wrapper libraries on a 64-bit build system.
133#
134# Pseudo will attempt to determine if a 32-bit wrapper is necessary, but
135# it doesn't always guess properly. If you have 32-bit executables on
136# your 64-bit build system, you likely want to set this to "0",
137# otherwise you could end up with incorrect file attributes on the
138# target filesystem.
139#
140# Default is to not build 32 bit libs on 64 bit systems, uncomment this
141# if you need the 32 bits libs
142#NO32LIBS = "0"
143
144# Uncomment the following lines to enable multilib builds
145#require conf/multilib.conf
146#MULTILIBS = "multilib:lib32"
147#DEFAULTTUNE_virtclass-multilib-lib32 = "x86"
148
149# Set RPM_PREFER_ELF_ARCH to configure preferred ABI when using rpm packaging
150# backend to generate a rootfs, choices are:
151# 1: ELF32 wins
152# 2: ELF64 wins
153# 4: ELF64 N32 wins (for mips64 or mips64el only)
154#RPM_PREFER_ELF_ARCH ?= "2"
155
156# The network based PR service host and port
157# Uncomment the following lines to enable PRservice.
158# Set PRSERV_HOST to 'localhost:0' to automatically
159# start local PRService.
160# Set to other values to use remote PRService.
161#PRSERV_HOST = "localhost:0"
162
163# Additional image generation features
164#
165# The following is a list of classes to import to use in the generation of images
166# currently an example class is image_types_uboot
167# IMAGE_CLASSES = " image_types_uboot"
168
169# The following options will build a companion 'debug filesystem' in addition
170# to the normal deployable filesystem. This companion system allows a
171# debugger to know the symbols and related sources. It can be used to
172# debug a remote 'production' system without having to add the debug symbols
173# and sources to remote system. If IMAGE_FSTYPES_DEBUGFS is not defined, it
174# defaults to IMAGE_FSTYPES.
175#IMAGE_GEN_DEBUGFS = "1"
176#IMAGE_FSTYPES_DEBUGFS = "tar.gz"
177
178# Incremental rpm image generation, the rootfs would be totally removed
179# and re-created in the second generation by default, but with
180# INC_RPM_IMAGE_GEN = "1", the rpm based rootfs would be kept, and will
181# do update(remove/add some pkgs) on it. NOTE: This is not suggested
182# when you want to create a productive rootfs
183#INC_RPM_IMAGE_GEN = "1"
184
185# This is a list of packages that require a commercial license to ship
186# product. If shipped as part of an image these packages may have
187# implications so they are disabled by default. To enable them,
188# un-comment the below as appropriate.
189#LICENSE_FLAGS_WHITELIST = "commercial_gst-fluendo-mp3 \
190# commercial_gst-openmax \
191# commercial_gst-plugins-ugly \
192# commercial_lame \
193# commercial_libmad \
194# commercial_libomxil \
Andrew Geissler9b4d8b02021-02-19 12:26:16 -0600195# commercial_mpeg2dec \
196# commercial_qmmp"
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500197
198
199#
200# Disk space monitor, take action when the disk space or the amount of
201# inode is running low, it is enabled when BB_DISKMON_DIRS is set.
202#
203# Set the directory for the monitor, the format is:
204# "action,directory,minimum_space,minimum_free_inode"
205#
206# The "action" must be set and should be one of:
207# ABORT: Immediately abort
208# STOPTASKS: The new tasks can't be executed any more, will stop the build
209# when the running tasks have been done.
210# WARN: show warnings (see BB_DISKMON_WARNINTERVAL for more information)
211#
212# The "directory" must be set, any directory is OK.
213#
214# Either "minimum_space" or "minimum_free_inode" (or both of them)
215# should be set, otherwise the monitor would not be enabled,
216# the unit can be G, M, K or none, but do NOT use GB, MB or KB
217# (B is not needed).
218#BB_DISKMON_DIRS = "STOPTASKS,${TMPDIR},1G,100K WARN,${SSTATE_DIR},1G,100K"
219#
220# Set disk space and inode interval (only works when the action is "WARN",
221# the unit can be G, M, or K, but do NOT use the GB, MB or KB
222# (B is not needed), the format is:
223# "disk_space_interval,disk_inode_interval", the default value is
224# "50M,5K" which means that it would warn when the free space is
225# lower than the minimum space(or inode), and would repeat the warning
226# when the disk space reduces 50M (or the amount of inode reduces 5k).
227#BB_DISKMON_WARNINTERVAL = "50M,5K"
228
229# Archive the source and put them to ${DEPLOY_DIR}/sources/.
230#
231#INHERIT += "archiver"
232#
233# The tarball for the patched source will be created by default, and you
234# can configure the archiver as follow:
235#
236# Create archive for:
237# 1) original (or unpacked) source:
238#ARCHIVER_MODE[src] = "original"
239# 2) patched source: (default)
240#ARCHIVER_MODE[src] = "patched"
241# 3) configured source:
242#ARCHIVER_MODE[src] = "configured"
243#
244# 4) the patches between do_unpack and do_patch:
245#ARCHIVER_MODE[diff] = "1"
246# set the files that you'd like to exclude from the diff:
247#ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches"
248#
249# 5) the environment data, similar to 'bitbake -e recipe':
250#ARCHIVER_MODE[dumpdata] = "1"
251#
252# 6) the recipe (.bb and .inc):
253#ARCHIVER_MODE[recipe] = "1"
254#
255# 7) Whether output the .src.rpm package:
256#ARCHIVER_MODE[srpm] = "1"
257#
258# 8) Filter the license, the recipe whose license in
259# COPYLEFT_LICENSE_INCLUDE will be included, and in
260# COPYLEFT_LICENSE_EXCLUDE will be excluded.
261#COPYLEFT_LICENSE_INCLUDE = 'GPL* LGPL*'
262#COPYLEFT_LICENSE_EXCLUDE = 'CLOSED Proprietary'
263#
264# 9) Config the recipe type that will be archived, the type can be
265# target, native, nativesdk, cross, crosssdk and cross-canadian,
266# you can set one or more types. Archive all types by default.
267#COPYLEFT_RECIPE_TYPES = 'target'
268#
269
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500270#
271# GCC/LD FLAGS to enable more secure code generation
272#
273# By including the security_flags include file you enable flags
274# to the compiler and linker that cause them to generate more secure
Brad Bishop79641f22019-09-10 07:20:22 -0400275# code.
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500276# This does affect compile speed slightly.
277#
278# Use the following line to enable the security compiler and linker flags to your build
279#require conf/distro/include/security_flags.inc
280
281# Image level user/group configuration.
282# Inherit extrausers to make the setting of EXTRA_USERS_PARAMS effective.
Brad Bishop19323692019-04-05 15:28:33 -0400283#IMAGE_CLASSES += "extrausers"
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500284# User / group settings
Brad Bishop19323692019-04-05 15:28:33 -0400285# The settings are separated by the ; character.
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500286# Each setting is actually a command. The supported commands are useradd,
287# groupadd, userdel, groupdel, usermod and groupmod.
288#EXTRA_USERS_PARAMS = "\
Brad Bishop19323692019-04-05 15:28:33 -0400289# useradd -p '' tester; \
290# groupadd developers; \
291# userdel nobody; \
292# groupdel video; \
293# groupmod -g 1020 developers; \
294# usermod -s /bin/sh tester; \
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500295#"
296
297# Various packages dynamically add users and groups to the system at package
298# install time. For programs that do not care what the uid/gid is of the
299# resulting users/groups, the order of the install will determine the final
300# uid/gid. This can lead to non-deterministic uid/gid values from one build
301# to another. Use the following settings to specify that all user/group adds
302# should be created based on a static passwd/group file.
303#
304# Note, if you enable or disable the useradd-staticids in a configured system,
305# the TMPDIR may contain incorrect uid/gid values. Clearing the TMPDIR
306# will correct this condition.
307#
308# By default the system looks in the BBPATH for files/passwd and files/group
Andrew Geisslerf0343792020-11-18 10:42:21 -0600309# the default can be overridden by specifying USERADD_UID/GID_TABLES.
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500310#
311#USERADDEXTENSION = "useradd-staticids"
312#USERADD_UID_TABLES = "files/passwd"
313#USERADD_GID_TABLES = "files/group"
314#
315# In order to prevent generating a system where a dynamicly assigned uid/gid
316# can exist, you should enable the following setting. This will force the
317# system to error out if the user/group name is not defined in the
318# files/passwd or files/group (or specified replacements.)
319#USERADD_ERROR_DYNAMIC = "1"
320
321# Enabling FORTRAN
322# Note this is not officially supported and is just illustrated here to
323# show an example of how it can be done
324# You'll also need your fortran recipe to depend on libgfortran
325#FORTRAN_forcevariable = ",fortran"
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500326
327#
328# Kernel image features
329#
330# The INITRAMFS_IMAGE image variable will cause an additional recipe to
331# be built as a dependency to the what ever rootfs recipe you might be
332# using such as core-image-sato. The initramfs might be needed for
Andrew Geissler9b4d8b02021-02-19 12:26:16 -0600333# the initial boot of the target system such as to load kernel
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500334# modules prior to mounting the root file system.
335#
336# INITRAMFS_IMAGE_BUNDLE variable controls if the image recipe
337# specified by the INITRAMFS_IMAGE will be run through an extra pass
338# through the kernel compilation in order to build a single binary
339# which contains both the kernel image and the initramfs. The
340# combined binary will be deposited into the tmp/deploy directory.
341# NOTE: You can set INITRAMFS_IMAGE in an image recipe, but
342# INITRAMFS_IMAGE_BUNDLE can only be set in a conf file.
343#
344#INITRAMFS_IMAGE = "core-image-minimal-initramfs"
345#INITRAMFS_IMAGE_BUNDLE = "1"
346
347#
348# IPK Hierarchical feed
349#
350# In some cases it may be desirable not to have all package files in the same
351# directory. An example would be when package feeds are to be uploaded to a
352# shared webhosting service or transferred to a Windows machine which may have
353# problems with directories containing multiple thousands of files.
354#
355# If the IPK_HIERARCHICAL_FEED variable is set to "1", packages will be split
356# between subdirectories in a similar way to how Debian package feeds are
357# organised. In the hierarchical feed, package files are written to
358# <outdir>/<arch>/<pkg_prefix>/<pkg_subdir>, where pkg_prefix is the first
359# letter of the package file name for non-lib packages or "lib" plus the 4th
360# letter of the package file name for lib packages (eg, 'l' for less, 'libc' for
361# libc6). pkg_subdir is the root of the package file name, discarding the
362# version and architecture parts and the common suffixes '-dbg', '-dev', '-doc',
363# '-staticdev', '-locale' and '-locale-*' which are listed in
364# meta/conf/bitbake.conf.
365#
366# If IPK_HIERARCHICAL_FEED is unset or set to any other value, the traditional
367# feed layout is used where package files are placed in <outdir>/<arch>/.
368#
369#IPK_HIERARCHICAL_FEED = "1"
370#
371
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500372#
Andrew Geissler9b4d8b02021-02-19 12:26:16 -0600373# System initialization
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500374#
Andrew Geissler9b4d8b02021-02-19 12:26:16 -0600375#INIT_MANAGER = "none"
376#INIT_MANAGER = "sysvinit"
377#INIT_MANAGER = "systemd"
378#INIT_MANAGER = "mdev-busybox"
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500379
380#
Andrew Geissler9b4d8b02021-02-19 12:26:16 -0600381# Use a full set of packages instead of busybox for base utils
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500382#
Andrew Geissler9b4d8b02021-02-19 12:26:16 -0600383#PREFERRED_PROVIDER_base-utils = "packagegroup-core-base-utils"
384#VIRTUAL-RUNTIME_base-utils = "packagegroup-core-base-utils"
385#VIRTUAL-RUNTIME_base-utils-hwclock = "util-linux-hwclock"
386#VIRTUAL-RUNTIME_base-utils-syslog = "syslog"
387
388#
389# Enable LTO system-wide
390#
391#require conf/distro/include/lto.inc
392#DISTRO_FEATURES_append = " lto"
Andrew Geissler95ac1b82021-03-31 14:34:31 -0500393
394#
395# Set PS1 for SDK
396#
397#SDK_PS1 ?= "${SDK_NAME}${SDK_VENDOR}:\$ "