ipmisensor.cpp

#include <stdio.h>
#include <string.h>
#include <stdint.h>
#include <malloc.h>
#include "sensorhandler.h"

extern uint8_t find_type_for_sensor_number(uint8_t);


struct sensorRES_t {
	uint8_t sensor_number;
	uint8_t operation;
	uint8_t sensor_reading;
	uint8_t assert_state7_0;
	uint8_t assert_state14_8;
	uint8_t deassert_state7_0;
	uint8_t deassert_state14_8;
	uint8_t event_data1;
	uint8_t event_data2;
	uint8_t event_data3;
} __attribute__ ((packed));

#define ISBITSET(x,y) (((x)>>(y))&0x01)
#define ASSERTINDEX 0
#define DEASSERTINDEX 1

// Sensor Type,  Offset, function handler, Dbus Method, Assert value, Deassert value
struct lookup_t {
	uint8_t sensor_type;
	uint8_t offset;
	int (*func)(const sensorRES_t *, const lookup_t *, const char *);
	char    member[16];
	char    assertion[64];
	char    deassertion[64];
};

extern int updateDbusInterface(uint8_t , const char *, const char *);

int set_sensor_dbus_state_simple(const sensorRES_t *pRec, const lookup_t *pTable, const char *value) {

	return set_sensor_dbus_state_s(pRec->sensor_number,
                                   pTable->member,
                                   value);
}

struct event_data_t {
	uint8_t data;
	char    text[64];
};

event_data_t g_fwprogress02h[] = {
	{0x00, "Unspecified"},
	{0x01, "Memory Init"},
	{0x02, "HD Init"},
	{0x03, "Secondary Proc Init"},
	{0x04, "User Authentication"},
	{0x05, "User init system setup"},
	{0x06, "USB configuration"},
	{0x07, "PCI configuration"},
	{0x08, "Option ROM Init"},
	{0x09, "Video Init"},
	{0x0A, "Cache Init"},
	{0x0B, "SM Bus init"},
	{0x0C, "Keyboard Init"},
	{0x0D, "Embedded ctrl init"},
	{0x0E, "Docking station attachment"},
	{0x0F, "Enable docking station"},
	{0x10, "Docking station ejection"},
	{0x11, "Disabling docking station"},
	{0x12, "Calling OS Wakeup"},
	{0x13, "Starting OS"},
	{0x14, "Baseboard Init"},
	{0x15, ""},
	{0x16, "Floppy Init"},
	{0x17, "Keyboard Test"},
	{0x18, "Pointing Device Test"},
	{0x19, "Primary Proc Init"},
	{0xFF, "Unknown"}
};

event_data_t g_fwprogress00h[] = {
	{0x00, "Unspecified."},
	{0x01, "No system memory detected"},
	{0x02, "No usable system memory"},
	{0x03, "Unrecoverable hard-disk/ATAPI/IDE"},
	{0x04, "Unrecoverable system-board"},
	{0x05, "Unrecoverable diskette"},
	{0x06, "Unrecoverable hard-disk controller"},
	{0x07, "Unrecoverable PS/2 or USB keyboard"},
	{0x08, "Removable boot media not found"},
	{0x09, "Unrecoverable video controller"},
	{0x0A, "No video device detected"},
	{0x0B, "Firmware ROM corruption detected"},
	{0x0C, "CPU voltage mismatch"},
	{0x0D, "CPU speed matching"},
	{0xFF, "unknown"},
};


char *event_data_lookup(event_data_t *p, uint8_t b) {

	while(p->data != 0xFF) {
		if (p->data == b) {
			break;
		}
		p++;
	}

	return p->text;
}



//  The fw progress sensor contains some additional information that needs to be processed
//  prior to calling the dbus code.
int set_sensor_dbus_state_fwprogress(const sensorRES_t *pRec, const lookup_t *pTable, const char *value) {

	char valuestring[128];
	char* p = valuestring;

	switch (pTable->offset) {

		case 0x00 : snprintf(p, sizeof(valuestring), "POST Error, %s", event_data_lookup(g_fwprogress00h, pRec->event_data2));
					break;
		case 0x01 : /* Using g_fwprogress02h for 0x01 because that's what the ipmi spec says to do */
					snprintf(p, sizeof(valuestring), "FW Hang, %s", event_data_lookup(g_fwprogress02h, pRec->event_data2));
					break;
		case 0x02 : snprintf(p, sizeof(valuestring), "FW Progress, %s", event_data_lookup(g_fwprogress02h, pRec->event_data2));
					break;
		default : snprintf(p, sizeof(valuestring), "Internal warning, fw_progres offset unknown (0x%02x)", pTable->offset);
					break;
	}

	return set_sensor_dbus_state_s(pRec->sensor_number,
                                   pTable->member,
                                   p);
}

// Handling this special OEM sensor by coping what is in byte 4.  I also think that is odd
// considering byte 3 is for sensor reading.  This seems like a misuse of the IPMI spec
int set_sensor_dbus_state_osbootcount(const sensorRES_t *pRec, const lookup_t *pTable, const char *value) {
	return set_sensor_dbus_state_y(pRec->sensor_number,
                                   "setValue",
                                   pRec->assert_state7_0);
}

int set_sensor_dbus_state_system_event(const sensorRES_t *pRec, const lookup_t *pTable, const char *value) {
	char valuestring[128];
	char* p = valuestring;

	switch (pTable->offset) {

		case 0x00 : snprintf(p, sizeof(valuestring), "System Reconfigured");
					break;
		case 0x01 : snprintf(p, sizeof(valuestring), "OEM Boot Event");
					break;
		case 0x02 : snprintf(p, sizeof(valuestring), "Undetermined System Hardware Failure");
					break;
		case 0x03 : snprintf(p, sizeof(valuestring), "System Failure see error log for more details (0x%02x)", pRec->event_data2);
					break;
		case 0x04 : snprintf(p, sizeof(valuestring), "System Failure see PEF error log for more details (0x%02x)", pRec->event_data2);
					break;
		default : snprintf(p, sizeof(valuestring), "Internal warning, system_event offset unknown (0x%02x)", pTable->offset);
					break;
	}

	return set_sensor_dbus_state_s(pRec->sensor_number,
                                   pTable->member,
                                   p);
}


//  This table lists only senors we care about telling dbus about.
//  Offset definition cab be found in section 42.2 of the IPMI 2.0
//  spec.  Add more if/when there are more items of interest.
lookup_t g_ipmidbuslookup[] = {

	{0xe9, 0x00, set_sensor_dbus_state_simple, "setValue", "Disabled", ""}, // OCC Inactive 0
	{0xe9, 0x01, set_sensor_dbus_state_simple, "setValue", "Enabled", ""},   // OCC Active 1
	// Turbo Allowed
	{0xda, 0x00, set_sensor_dbus_state_simple, "setValue", "True", "False"},
	// Power Supply Derating
	{0xb4, 0x00, set_sensor_dbus_state_simple, "setValue", "", ""},
	// Power Cap
	{0xC2, 0x00, set_sensor_dbus_state_simple, "setValue", "", ""},
	{0x07, 0x07, set_sensor_dbus_state_simple, "setPresent", "True", "False"},
	{0x07, 0x08, set_sensor_dbus_state_simple, "setFault",   "True", "False"},
	{0x0C, 0x06, set_sensor_dbus_state_simple, "setPresent", "True", "False"},
	{0x0C, 0x04, set_sensor_dbus_state_simple, "setFault",   "True", "False"},
	{0x0F, 0x02, set_sensor_dbus_state_fwprogress, "setValue", "True", "False"},
	{0x0F, 0x01, set_sensor_dbus_state_fwprogress, "setValue", "True", "False"},
	{0x0F, 0x00, set_sensor_dbus_state_fwprogress, "setValue", "True", "False"},
	{0xC7, 0x01, set_sensor_dbus_state_simple, "setFault", "True", "False"},
	{0xc3, 0x00, set_sensor_dbus_state_osbootcount, "setValue", "" ,""},
	{0x1F, 0x00, set_sensor_dbus_state_simple, "setValue", "Boot completed (00)", ""},
	{0x1F, 0x01, set_sensor_dbus_state_simple, "setValue", "Boot completed (01)", ""},
	{0x1F, 0x02, set_sensor_dbus_state_simple, "setValue", "PXE boot completed", ""},
	{0x1F, 0x03, set_sensor_dbus_state_simple, "setValue", "Diagnostic boot completed", ""},
	{0x1F, 0x04, set_sensor_dbus_state_simple, "setValue", "CD-ROM boot completed", ""},
	{0x1F, 0x05, set_sensor_dbus_state_simple, "setValue", "ROM boot completed", ""},
	{0x1F, 0x06, set_sensor_dbus_state_simple, "setValue", "Boot completed (06)", ""},
	{0x12, 0x00, set_sensor_dbus_state_system_event, "setValue", "", ""},
	{0x12, 0x01, set_sensor_dbus_state_system_event, "setValue", "", ""},
	{0x12, 0x02, set_sensor_dbus_state_system_event, "setValue", "", ""},
	{0x12, 0x03, set_sensor_dbus_state_system_event, "setValue", "", ""},
	{0x12, 0x04, set_sensor_dbus_state_system_event, "setValue", "", ""},
	{0xCA, 0x00, set_sensor_dbus_state_simple,       "setValue", "Disabled", ""},
	{0xCA, 0x01, set_sensor_dbus_state_simple,       "setValue", "Enabled", ""},
	{0xFF, 0xFF, NULL, "", "", ""}
};


void reportSensorEventAssert(sensorRES_t *pRec, int index) {
	lookup_t *pTable = &g_ipmidbuslookup[index];
	(*pTable->func)(pRec, pTable, pTable->assertion);
}
void reportSensorEventDeassert(sensorRES_t *pRec, int index) {
	lookup_t *pTable = &g_ipmidbuslookup[index];
	(*pTable->func)(pRec, pTable, pTable->deassertion);
}


int findindex(const uint8_t sensor_type, int offset, int *index) {

	int i=0, rc=0;
	lookup_t *pTable = g_ipmidbuslookup;

	do {
		if ( ((pTable+i)->sensor_type == sensor_type) &&
			 ((pTable+i)->offset  == offset) ) {
			rc = 1;
			*index = i;
			break;
		}
		i++;
	} while ((pTable+i)->sensor_type  != 0xFF);

	return rc;
}

bool shouldReport(uint8_t sensorType, int offset, int *index) {

	bool rc = false;

	if (findindex(sensorType, offset, index)) { rc = true;	}
    if (rc == false) {
#ifdef __IPMI_DEBUG__
        log<level::DEBUG>("LOOKATME: Sensor should not be reported",
                        entry("SENSORTYPE=0x%02x", sensorType),
                        entry("OFFSET=0x%02x", offset));
#endif
        }

	return rc;
}


int updateSensorRecordFromSSRAESC(const void *record) {

	sensorRES_t *pRec = (sensorRES_t *) record;
	uint8_t stype;
	int index, i=0;

	stype = find_type_for_sensor_number(pRec->sensor_number);

	// 0xC3 types use the assertion7_0 for the value to be set
	// so skip the reseach and call the correct event reporting
	// function
	if (stype == 0xC3) {

		shouldReport(stype, 0x00, &index);
		reportSensorEventAssert(pRec, index);

	} else {
		// Scroll through each bit position .  Determine
		// if any bit is either asserted or Deasserted.
		for(i=0;i<8;i++) {

			if ((ISBITSET(pRec->assert_state7_0,i))  &&
				(shouldReport(stype, i, &index)))
			{
				reportSensorEventAssert(pRec, index);
			}
			if ((ISBITSET(pRec->assert_state14_8,i))  &&
				(shouldReport(stype, i+8, &index)))
			{
				reportSensorEventAssert(pRec, index);
			}
			if ((ISBITSET(pRec->deassert_state7_0,i))  &&
				(shouldReport(stype, i, &index)))
			{
				reportSensorEventDeassert(pRec, index);
			}
			if ((ISBITSET(pRec->deassert_state14_8,i))  &&
				(shouldReport(stype, i+8, &index)))
			{
				reportSensorEventDeassert(pRec, index);
			}
		}

	}


	return 0;
}